IGAP-610H+ | Thiết bị truy cập không dây chuẩn công nghiệp

Chi tiết sản phẩm

MODEL:

IGAP-610H+

Industrial IEEE 802.11 a/b/g/n high power wireless AP with 1x10/100/1000Base-T(X), PoE P.D

(Bộ thu phát không dây chuẩn công nghiệp IEEE 802.11 a/b/g/n high power với 1x10/100/1000Base-T(X), PoE P.D)

Introduction
Specification
Order Information
Accessory
Download

Overview

IGAP-610H+ is a reliable WLAN Access Point with 1 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless module. It can be configured to operate in AP/Client/Repeater Mode. You are able to configure IGAP-610H+ by WEB interface via LAN port or WLAN interface. In addition, IGAP-610H+ also provides P.D. feature on Ethernet port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-610H+ is one of the best communication solutions for wireless applications on the industrial network.

Features

High Speed Air Connectivity: Dual Band in IEEE 802.11 a/b/g/n and b/g/n WLAN interface selectable and support up to 300Mbps link speed
12~48VDC power input on terminal block
1 Gigabit Ethernet ports with 2KV isolation for PoE P.D.
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support X-Roaming < 100 ms
Support Multiple-SSID to 4 SSID with VLAN
Support MAC Filter
High transmission power (27 dBm)
High throughput > 180Mbps with HT40 2x2 MIMO
Support Long Distance Air Connectivity
Support AP/Client/Repeater
Wireless connecting status monitoring
Secured Management by HTTPS
Event Warning by Syslog, Email, SNMP Trap, and Relay output
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled

Specifications
ORing AP Model	IGAP-610H+
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
Antenna Connector	2
PoE P.D. Port	Present at ETH1 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 2000 VDC min. Isolation Resistance : 10⁸ ohms min
WLAN Interface
Operating Mode	AP/Client/Repeater
Antenna and Connector	Reverse SMA Female
Modulation	IEEE802.11a: OFDM IEEE802.11b: CCK/DQPSK/DBPSK IEEE802.11g: OFDM IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band	America/FCC: 2.412~2.462 GHz (11 channels) 5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels ) Europe CE/ETSI: 2.412~2.472 GHz (13 channels) 5.180~5.240 GHz ( 4 channels )
Transmission Rate	802.11b: 11, 5.5, 2, 1 Mbps; 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: up to 300Mbps
Transmit Power	802.11a: 24dBm ± 1.5dBm@6Mbps, 802.11a: 12dBm ± 1.5dBm@54Mbps 802.11b: 23dBm ± 1.5dBm@1Mbps, 802.11b: 17dBm ± 1.5dBm@11Mbps 802.11g: 16dBm ± 1.5dBm@54Mbps 802.11gn HT20: 15dBm ± 1.5dBm @MCS7, 802.11gn HT40: 14dBm ± 1.5dBm @MCS7 802.11an HT20: 12dBm ± 1.5dBm @MCS7, 802.11an HT40: 11dBm ± 1.5dBm @MCS7
Receiver Sensitivity	802.11a : -92dBm ± 2dBm@6Mbps, 802.11a : -76dBm ± 2dBm@54Mbps 802.11b : -98dBm ± 2dBm@1Mbps, 802.11b : -85dBm ± 2dBm@11Mbps 802.11g : -76dBm ± 2dBm@54Mbps 802.11gn HT20:-75dBm ± 2dBm@MCS7, 802.11gn HT40:-72dBm ± 2dBm@MCS7 802.11an HT20:-74dBm ± 2dBm@MCS7, 802.11an HT40:-71dBm ± 2dBm@MCS7
Encryption Security	WEP: (64-bit ,128-bit key) WPA/WPA2 PSK :TKIP and AES encryption (802.11i) 802.1X/RADIUS Authentication supported
Wireless Security	SSID broadcast disable and enable
Protocol Support
Protocol	ARP, BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP
LED Indicators
Power Indicator	3 x LEDs, P1, P2, PoE: Green On : Power is on and functioning Normal
10/100/1000Base-T(X) RJ45 Port Indicator	2 x LEDs, LNK/ACT:Green for port Act. Speed: Green for port Link at 1000Mbps Amber for port Link at 100Mbps. Off for port Link at 10Mbps
WLAN LEDs	3 x LEDs signal quality 75%, 50% 25% 1 x Green for WLAN Link /Act
Fault	1 x LED, Blink for system booting, Solid for system ready.
Power
Redundant Input Power	Dual DC inputs. 12~48VDC on 4-pin terminal block
Power Consumption (Typ.)	7 Watts
Overload Current Protection	Present
Reverse Polarity Protection	Present on terminal block
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	45 (W) x 95 (D) x 115 (H) mm
Weight (g)	375 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F) (TBD)
Operating Temperature	-10 to 70°C(-4 to 158°F)
Operating Humidity	5% to 95% Non-condensing (TBD)
Regulatory Approvals
EMC	CE EMC (EN 55024, EN 55032), FCC Part 15B
EMI	EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A
EMS	EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT),IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN61000-4-8(PFMF),IEC/EN 61000-4-11(DIP))
Shock	IEC60068-2-27
Free Fall	IEC60068-2-31
Vibration	IEC60068-2-6
Safety	EN60950-1
MTBF	211477 hrs
Warranty	5 years

Model Name	Description
IGAP-610H+_EU	Industrial IEEE 802.11 a/b/g/n high power wireless AP with 1x10/100/1000Base-T(X), PoE P.D, EU band
IGAP-610H+_US	Industrial IEEE 802.11 a/b/g/n high power wireless AP with 1x10/100/1000Base-T(X), PoE P.D, US band

Datasheet	Preview	Version	Release Date	Size	Download
DataSheet_IGAP-610H+_V2.0.pdf	See detail IGAP-610H+	V2.0	Dec 16, 2019	664.48KB
UserManual	Preview	Version	Release Date	Size	Download
User manual_IGAP-610H+_W612H+_ V1.1.pdf	See detail IGAP-610H+	V1.1	Dec 16, 2019	1.53MB
Certification	Preview	Version	Release Date	Size	Download
ORing_Wireless _Product_CE_ Declaration_of_Conformity- 2019.pdf	See detail ORing_Wireless _Product_CE Declaration_of_Conformity-2019		Mar 07, 2019	182.70KB
QIG	Preview	Version	Release Date	Size	Download
QIG_IGAP-610H+_1907-200-G610H+XXX2-FX010.pdf	See detail IGAP-610H+	V2.0	Dec 16, 2019	469.42KB