IAP-420+, Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), oringet.vn, hoangvanco, Công ty TNHH Công Nghệ - Tin Học Hoàng Vân

IAP-420+ Công ty TNHH Công Nghệ - Tin Học Hoàng Vân

IAP-420, IAP-420+, Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), oringet.vn, hoangvanco, Công ty TNHH Công Nghệ - Tin Học Hoàng Vân

Chi tiết sản phẩm

MODEL:

IAP-420+

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D

(Bộ thu phát không dây chuẩn công nghiệp IEEE 802.11 b/g/n với 2 cổng mạng 10/100Base-T(X)), 1 cổng PoE P.D)

Introduction
Specification
Order Information
Accessory
Download

Overview

IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.

Features

High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support X-Roaming < 100 ms
Support AP/Client/Bridge/AP-Client Mode
Secured Management by HTTPs
Wireless connecting status monitoring
Event Warning by Syslog, Email, SNMP Trap
1KV isolation for PoE P.D. port of IAP-420+
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled

Specifications
ORing Switch Model	IAP-420	IAP-420+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX	2
PoE P.D. Port	-	Present at ETH Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min
WLAN Interface
Operating Mode	AP/Client/Bridge/AP-Client
Antenna and Connector	1 x External reverse SMA-type antenna connector
Radio Frequency Type	DSSS, OFDM
Modulation	IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band	America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels )
Transmission Rate	802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n(40MHz): UP to 150 Mbps
Transmit Power	802.11b: 19dBm ±1.5dBm 802.11g: 17dBm ±1.5dBm 802.11n(2.4G@20MHz): 16.5dBm ±1.5dBm 802.11n(2.4G@40MHz): 14.5dBm ±1.5dBm
Receiver Sensitivity	802.11b: -90dBm ±2dBm@1Mbps 802.11g: -72dBm ±2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm
Encryption Security	WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption
Wireless Security	SSID broadcast disable and enable
Protocol Support
Protocol	ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP
LED Indicators
Power Indicator	LED x 3, PWR 1, 2, (PoE): Green On: Power is on and functioning Normally.
10/100Base-T(X) RJ45 Port Indicator	LED x 2 , Green for port Link/Act at 100Mbps.
WLAN LEDs	WLAN Link /ACT: Green: Blinking
Power
Redundant Input Power	Dual DC inputs. 12~48VDC on 4-pin terminal block
Power Consumption (Typ.)	4 Watts
Overload Current Protection	Present
Reverse Polarity Protection	Present
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	41(W)x81(D)x95(H) mm
Weight (g)	292 g	297 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C(14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-31
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	5 years

Model Name	Description
IAP-420_EU	Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) EU band
IAP-420_US	Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) US band
IAP-420+_EU	Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., EU band
IAP-420+_US	Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., US band

High Gain Omnidirectiona Antennas
RFA-O10-NM-WA	Omni-directional High-gain Antenna, 5GHz, 10dBi max, N Male connector
RFA-O12-NF-WA	Omni-directional High-gain Antenna, 5GHz, 12dBi max, N Female connector with wall-mount bracket
RFA-O5-NM-WA	Omni-directional High-gain Antenna, 5GHz, 5dBi max, N Male connector
RFA-O7-NM-WG	Omni-directional High-gain Antenna, 2.4GHz, 7dBi max, N Male connector

Omnidirectional Antennas
RFA-O5-NF3-W3GGS-028	Rooftop/Outdoor High Performance Omni Antenna , 3G/4G, GPS/GLONASS applications, 5dBi max.,N Female connector

RF Antenna Base
RFB-M2-1000	N Female magnetic antenna base with cable length 10m and RP-SMA Male connector
RFB-M2-150	N Female magnetic antenna base with cable length 1.5m and RP-SMA Male connector

RF Cable
RFC-SM-SMR-150	Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector
RFC-NF-NM-1000	Low loss RF Cable, Cable length 10m, N Male to N Male connector
RFC-NF-NM-500	Low loss RF Cable, Cable length 5m, N Female to N Male connector
RFC-NM-NM-150	Low loss RF Cable, Cable length 1.5m, N Male to N Male connector
RFC-NM-SMR-1000	Low loss RF Cable, Cable length 10m, N Male to RP-SMA Male connector
RFC-NM-SMR-150	Low loss RF Cable, Cable length 1.5m, N Male to RP-SMA Male connector
RFC-NM-SMR-500	Low loss RF Cable, Cable length 5m, N Male to RP-SMA Male connector
RFC-SF-SMR-150	Low loss RF Cable, Cable length 1.5m, SMA Female to RP-SMA Male connector
RFC-SFR-SMR-1000	Low loss RF Cable, Cable length 10m, RP-SMA Female to RP-SMA Male connector
RFC-SJ-SMR-150	Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector
RFC-NF-NM-50	Low loss RF Cable, Cable length 0.5m, N Female to N Male connector

RF Surge Protector
RFP-NF-NM-WAG	High-power RF Surge Protector, 0~6GHz, N Female to N Male connector

Datasheet	Preview	Version	Release Date	Size	Download
DataSheet_IAP-420(+).pdf	No		May 03, 2016	286.18KB
UserManual	Preview	Version	Release Date	Size	Download
User manual_IAP-420(+).pdf	No	V1.1	May 03, 2016	1.59MB
Certification	Preview	Version	Release Date	Size	Download
ORing_Wireless _Product_CE_ Declaration_of_Conformity- 2019.pdf	See detail ORing_Wireless _Product_CE Declaration_of_Conformity-2019		Mar 07, 2019	182.70KB
QIG	Preview	Version	Release Date	Size	Download
QIG_IAP-420 Series.pdf	No	V1.1	May 03, 2016	232.27KB
Firmware	Preview	Version	Release Date	Size	Download
FW_IAP-420.zip	No	V1.0e	May 03, 2016	6.32MB