IGAP-620+_EU, Industrial IEEE 802.11 a/b/g/n wireless access point

Thiết bị mạng không dây công nghiệp, Industrial Wireless Access Point, WiFi Access Points, truy cập không dây, truyền thông không dây

Điểm truy cập không dây công nghiệp WLAN

IGAP-620+_EU | Điểm truy cập không dây công nghiệp

IGAP-620+_EU , Thiết bị mạng không dây công nghiệp, Industrial Wireless Access Point, WiFi Access Points, truy cập không dây, truyền thông không dây

IGAP-620+_EU, là Điểm truy cập WLAN đáng tin cậy với 2 cổng Ethernet Gigabit và mô-đun không dây IEEE 802.11 a/b/g/n. Nó có thể được cấu hình để hoạt động ở chế độ AP/Bridge/Repeater/AP-Client.

Chi tiết sản phẩm

MODEL:

IGAP-620+_EU

Industrial IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000 Base-T(X)

Introduction
Specification
Order Information
Accessory
Download

Introduction

Overview

IGAP-620 is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless modules. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-620 by WEB interface via LAN port or WLAN interface. IGAP-620 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-620 series also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-620 is one of the best communication solutions for wireless applications on the industrial network.

Features

High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Support X-Roaming < 60 ms
Support wireless load balance
Support MAC Filter
Support Long Distance Air Connectivity
Provide Digital Input and Digital Output
Support AP/Bridge/Repeater/AP-Client Mode
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
Wireless connecting status monitoring
Secured Management by HTTPS
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
Rigid IP-30 housing design
DIN-Rail and Wall-mount enabled

Specification

Specifications
ORing AP Model	IGAP-620+
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX	2
5-Pin Terminal Block	2(DI x 4 and DO x 4) : Dry Contact: On: short to GND, Off: open Wet Contact (DI to COM/GND): On: 0 to 3VDC, Off: 10 to 30VDC
RS-232 Console port in DB9	115200, 8 ,N ,1
Antenna Connector	2
PoE P.D. Port	Present at ETH2 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 10⁸ ohms min
WLAN Interface
Operating Mode	AP/Bridge/Repeater/AP-Client
Antenna and Connector	2xReverse SMA Female
Modulation	IEEE802.11a: OFDM IEEE802.11b: CCK/DQPSK/DBPSK IEEE802.11g: OFDM IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band	America/FCC: 2.412~2.462 GHz (11 channels) 5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels ) Europe CE/ETSI: 2.412~2.472 GHz (13 channels) 5.180~5.240 GHz ( 4 channels )
Transmission Rate	802.11b: 11, 5.5, 2, 1 Mbps; 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: up to 300Mbps
Transmit Power	802.11a: 12dBm ± 1.5dBm@54Mbps 802.11b: 17dBm ± 1.5dBm@11Mbps 802.11g: 16dBm ± 1.5dBm@54Mbps 802.11gn HT20: 15dBm ± 1.5dBm @MCS7 802.11gn HT40: 14dBm ± 1.5dBm @MCS7 802.11an HT20: 12dBm ± 1.5dBm @MCS7 802.11an HT40: 11dBm ± 1.5dBm @MCS7
Receiver Sensitivity	802.11a : -76dBm ± 2dBm@54Mbps 802.11b : -85dBm ± 2dBm@11Mbps 802.11g : -76dBm ± 2dBm@54Mbps 802.11gn HT20:-75dBm ± 2dBm@MCS7 802.11gn HT40:-72dBm ± 2dBm@MCS7 802.11an HT20:-74dBm ± 2dBm@MCS7 802.11an HT40:-71dBm ± 2dBm@MCS7
Encryption Security	WEP: (64-bit ,128-bit key) WPA/WPA2 PSK :TKIP and AES encryption (802.11i) 802.1X/RADIUS Authentication supported
Wireless Security	SSID broadcast disable and enable
Protocol Support
Protocol	ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)
LED Indicators
Power Indicator	3 x LEDs, PWR1(2)(PoE) / Ready: Red On : Power is on and booting up Green On : Power is on and functioning Normal
10/100/1000Base-T(X) RJ45 Port Indicator	2 x LEDs, LNK/ACT:Green for port Act. Speed: Green for port Link at 1000Mbps Amber for port Link at 100Mbps. Off for port Link at 10Mbps
WLAN LEDs	Green Solid On: RF on, Blink: data transmitting Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
Fault	1 x LED, Red for Ethernet link down or power down indicator
Fault Contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power	Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)	8.5 Watts
Overload Current Protection	Present
Reverse Polarity Protection	Present on terminal block
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g)	1155 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-25 to 70°C(-13 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-31
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	5 years

Order information

Model Name	Description
IGAP-620+_EU	Industrial IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000 Base-T(X)
IGAP-620+_US	Industrial IEEE 802.11 a/b/g/n wireless access point with 2x10/100/1000 Base-T(X)

Accessory

DIN-Rail Power Supply
DR-120-12	120W DIN-Rail 12VDC/10A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C
DR-120-24	120W DIN-Rail 24VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C
DR-120-48	120W DIN-Rail 48VDC/2.5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C
DR-4512	45W DIN-Rail 12VDC/3.5A Power Supply with universal 100 to 240VAC input, -10~50°C
DR-4524	45W DIN-Rail 24VDC/2A Power Supply with universal 100 to 240VAC input, -10~50°C
DR-75-12	75W DIN-Rail 12VDC/6.3A Power Supply with universal 100 to 240VAC input, -10~60°C
DR-75-24	75W DIN-Rail 24VDC/3.2A Power Supply with universal 100 to 240VAC input, -10~60°C
DR-75-48	75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input, -10~60°C

WLAN RF Antenna Omni-Directional
RFA-O10-NM-WA	Omni-directional High-gain Antenna, 5GHz, 10dBi max, N Male connector
RFA-O12-NF-WA	Omni-directional High-gain Antenna, 5GHz, 12dBi max, N Female connector with wall-mount bracket
RFA-O5-NM-WA	Omni-directional High-gain Antenna, 5GHz, 5dBi max, N Male connector
RFA-O7-NM-WG	Omni-directional High-gain Antenna, 2.4GHz, 7dBi max, N Male connector

RFA Antenna
RFA-O5-NF3-W3GGS-028	Rooftop/Outdoor High Performance Omni Antenna , 3G/4G, GPS/GLONASS applications, 5dBi max, N Female connector

RF Antenna Base
RFB-M2-1000	N Female magnetic antenna base with cable length 10m and RP-SMA Male connector
RFB-M2-150	N Female magnetic antenna base with cable length 1.5m and RP-SMA Male connector

RF Cable
RFC-SM-SMR-150	Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector
RFC-NF-NM-1000	Low loss RF Cable, Cable length 10m, N Male to N Male connector
RFC-NF-NM-50	Low loss RF Cable, Cable length 0.5m, N Female to N Male connector
RFC-NF-NM-500	Low loss RF Cable, Cable length 5m, N Female to N Male connector
RFC-NM-NM-150	Low loss RF Cable, Cable length 1.5m, N Male to N Male connector
RFC-NM-SMR-1000	Low loss RF Cable, Cable length 10m, N Male to RP-SMA Male connector
RFC-NM-SMR-150	Low loss RF Cable, Cable length 1.5m, N Male to RP-SMA Male connector
RFC-NM-SMR-500	Low loss RF Cable, Cable length 5m, N Male to RP-SMA Male connector
RFC-SF-SMR-150	Low loss RF Cable, Cable length 1.5m, SMA Female to RP-SMA Male connector
RFC-SFR-SMR-1000	Low loss RF Cable, Cable length 10m, RP-SMA Female to RP-SMA Male connector
RFC-SJ-SMR-150	Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector