TGPS-9084GT-M12X-BP2-24V, EN50155 12-port managed Gigabit PoE Ethernet switch

ORing's Transporter^TM series managed PoE Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.  TGPS-9084GT-M12X-BP2-24V is a managed Redundant Ring Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and 4x10/100/1000Base-T(X) ports which are specifically designed for the toughest and fully compliant with EN50155 requirement.  The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), O-Chain, MRP ^*NOTE and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.  TGPS-9084GT-M12X-BP2-24V also supports Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.  Each TGPS-9084GT-M12X-BP2-24V switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.  TGPS-9084GT-M12X-BP2-24V includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss.  And support wide operating temperature from -40^oC to 75^oC.  TGPS-9084GT-M12X-BP2-24V can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet, and console (CLI) configuration.  Therefore, the switch is one of the most reliable choices for EN50155 highly-managed Ethernet application.

 *NOTE: This function is available by request only

• Leading EN50155-compliant Ethernet switch for rolling stock application
• Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
• O-Chain allow multiple redundant network rings
• Supports standard IEC 62439-2 MRP^*NOTE (Media Redundancy Protocol) function
• Supports IEEE 802.3af/at compliant PoE with maximum 15.4/30Watts per port
• Supports PoE scheduled configuration and PoE auto-ping check function
• Supports IEEE 1588v2 clock synchronization
• Supports IPV6 new internet protocol version
• Supports Modbus TCP protocol
• Supports IEEE 802.3az Energy-Efficient Ethernet technology
• Provided HTTPS/SSH protocol to enhance network security
• Supports IP-based bandwidth management
• Supports application-based QoS management
• Supports Device Binding security function
• Supports DOS/DDOS auto prevention
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
• Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
• Supports ACL, TACACS+ and 802.1x User Authentication for security
• Supports 9.6K Bytes Jumbo Frame
• Multiple notification for warning of unexpected event
• Web-based, Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
• Supports LLDP Protocol
• Wall mounting enabled

10/100/1000Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX

Switching latency: <4.9 µs
Switching bandwidth: 24Gbps
Throughput (packet per second): 17.856Mpps@64Bytes packet
Max. Number of Available VLANs: 4095
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP

O-Ring
O-Chain
MRP^*NOTE
MSTP (RSTP/STP compatible)

Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.

Top Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Bottom dual-color LED for Ethernet speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off for 10Mbps

Dual 24 (16.8~30) VDC on 4-pin male S-coding connector

≤24VDC/0.79A (19Watts) (power consumption of P.S.E. is not included)

EN 55024 (IEC/EN 61000-4-2 (ESD: Contact 4KV), IEC/EN 61000-4-3 (RS 80MHz to 1GHz: 3V/m 1kHz 80% AM), IEC/EN 61000-4-4 (EFT Power 0.5KV, Signal 0.5KV), IEC/EN 61000-4-5 (Surge: Power 0.5KV, RJ45 1KV), IEC/EN 61000-4-6 (CS 150K-80MHz: 3Vrms 1kHz 80% AM), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)

Datasheet

Preview

Size

Download

TGPS-9084GT-M12X-BP2-24V

UserManual

Preview

Size

Download

TGPS-9084GT-M12X-BP2-24V

QIG

Preview

Size

Download

TGPS-9084GT-M12X-BP2-24V

Firmware

Preview

Size

Download

No