TGPS-9080-M12A-MV, EN50155 8-port managed Gigabit PoE Ethernet switch

ORing’s TransporterTM series managed Ethernet switches are designed for industrial applications such as rolling stock,vehicle, and railway. The TGPS-9080-M12A-MV,which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), O-Chain and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments. TGPS-9080-M12A-MV EN50155 Ethernet switch uses M12 connectors to ensure tight, robust
connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.TGPS-9080-M12A-MV also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-9080-M12A-MV switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will
provide power in a PoE connection. While TGPS-9080-M12A-MV complies with EN50155, the switch supports wide operating temperature from -40 oC to 75 oC. TGPS-9080-M12A-MV can also be managed centralized and convenient by Open-Vision,Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Ethernet application.

• Leading EN50155-compliant Ethernet switch for rolling stock application
• Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
• O-Chain allow multiple redundant network rings
• *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
• Supports IEEE 802.3at compliant PoE and total power budget is 60 Watts with maximum 30Watts per port
• Support PoE scheduled configuration and PoE auto-ping check function
• Support IEEE 1588v2 clock synchronization
• Support IPV6 new internet protocol version
• Support Modbus TCP protocol
• Support IEEE 802.3az Energy-Efficient Ethernet technology
• Provided HTTPS/SSH protocol to enhance network security
• Support SMTP client
• Support IP-based bandwidth management
• Support application-based QoS management
• Support Device Binding security function
• Support DOS/DDOS auto prevention
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
• Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
• Support ACL and 802.1x User Authentication for security
• Support DBU-01 (Data backup unit for easy configuration backup)
• Supports 9.6K Bytes Jumbo Frame
• Multiple notification for warning of unexpected event
• Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
• Wall mounting enabled
• IP-40 housing design

10/100/1000Base-T(X) with P.S.E.Ports in M12 Auto MDI/MDIX

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

Switching latency: 7 us
Switching bandwidth: 16Gbps
Max. Number of Available VLANs: 4095
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP

O-Ring
O-Chain
*note MRP
MSTP

Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.

Top Green LED for port Link/Act indicator.
Middle Green LED for PoE enable indicator
Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps, Off for10Mbps

72/96/110VDC (50.4-154VDC). 7/8 inch 5-pin male connector

13 Watts (power consumption of P.S.E. is not included)

60 Watts

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Datasheet

Size

UserManual

Size

QIG

Size

Firmware

Size