Hotline: 
MODEL:
IPMC-111PB
(End-of-life)
Industrial mini type Ethernet to fiber PoE media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket
(Bộ chuyển đổi quang điện chuẩn công nghiệp, hỗ trợ PoE, 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview
IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating temperature range from -40°C~75°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.
IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE capability and can satisfy most demand of operating environment
Features
- Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
- Supports Ethernet to fiber with SFP socket
- Support LFP (Link Fault Pass-through) function
- Supports full/half duplex operation mode
- P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
- Supports store and forward transmission
- Provided DIP-Switch to set operation mode
- High reliability and rigid IP-30 housing
- DIN-Rail and panel mounting enabled
|
ORing Model |
IPMC-111PB |
|
Physical Ports |
|
|
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
1 |
|
100/1000Base-X SFP port |
1 |
|
Technology |
|
|
Ethernet Standards |
IEEE 802.3 for 10Base-T |
|
Processing |
Store-and-Forward |
|
DIP-Switch setting |
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable |
|
LED Indicators |
|
|
Power indicator |
Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line |
|
10/100Base-T(X) RJ45 port indicator |
Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) 10Mbps or Link down
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
|
100Base-FX fiber port indicator |
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down |
|
LFP statue indicator |
Amber LED – (ON) LFP function fail / (OFF) LFP function disable |
|
PoE indicator |
Amber for P.S.E. indicator |
|
Power |
|
|
Input power |
Dual 50~57 VDC voltage power inputs at 4-pin terminal block |
|
Power consumption (Typ.) |
3Watts (Not include P.D’s device) |
|
Overload current protection |
Present |
|
Reverse polarity protection |
Present |
|
Physical Characteristic |
|
|
Enclosure |
IP-30 |
|
Dimension (W x D x H) |
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch) |
|
Weight (g) |
228 g |
|
Environmental |
|
|
Storage Temperature |
-40 to 85°C(-40 to 185°F) |
|
Operating Temperature |
-40 to 75°C (-40 to 167°F) |
|
Operating Humidity |
5% to 95% Non-condensing |
|
Regulatory approvals |
|
|
EMI |
FCC Part 15, CISPR (EN55032) class A |
|
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
|
Shock |
IEC60068-2-27 |
|
Free Fall |
IEC60068-2-32 |
|
Vibration |
IEC60068-2-6 |
|
Safety |
EN60950-1 |
|
Warranty |
5 years by ORing |
|
Model Name |
Description |
|
Industrial mini type Ethernet to fiber PoE media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket |
|
DIN-Rail Power Supply |
|
|
60W DIN-Rail 48VDC/1.25A Power Supply with universal 100 to 240VAC input, extended type, -25~80°C |
|
|
240W DIN-Rail 48VDC/5A Power Supply with 100 to 240VAC input , -25~70°C |
|
|
480W DIN-Rail 48VDC/10A Power Supply with 100 to 240VAC input , -25~70°C |
|
|
SFP Modules |
|
|
100Mbps SFP optical transceiver, multi-mode / 2km, 1310nm |
|
|
100Mbps SFP optical transceiver, multi-mode / 2km, 1310nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode / 100km, 1550nm |
|
|
100Mbps SFP optical transceiver, single-mode / 100km, 1550nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode / 120km, 1550nm |
|
|
100Mbps SFP optical transceiver, single-mode / 120km, 1550nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode / 30km, 1310nm |
|
|
100Mbps SFP optical transceiver, single-mode / 30km, 1310nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode / 60km, 1310nm |
|
|
100Mbps SFP optical transceiver, single-mode / 60km, 1310nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 20km, TX1310nm, RX1550nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 40km, TX1310nm, RX1550nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1310nm, RX1550nm |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1310nm, RX1550nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 20km, TX1550nm, RX1310nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 40km, TX1310nm, RX1550nm, industrial grade |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1550nm, RX1310nm, 0 ~ 70°C |
|
|
100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1550nm, RX1310nm, industrial grade |
|
156/1/35 Cộng Hòa, Phường 12, Quận Tân Bình, TP. HCM
028 3842 9843 - 028 3842 9845 - 0911 023 448
028 3842 9856
info@hoangvanco.com.vn
