IPMC-111PB++-60W, Industrial mini type Ethernet to fiber High power PoE++ media converter

Bộ chuyển đổi quang điện DIN Rail, Bộ chuyển đổi quang điện PoE, Bộ chuyển đổi quang điện tốc độ Gigabit

Bộ chuyển đổi quang điện công nghiệp, Industrial Media Converter, thiết bị chuyển đổi quang điện chuẩn công nghiệp, industrial fiber media converter,

IPMC-111PB++-60W | Bộ chuyển đổi quang điện chuẩn công nghiệp, hỗ trợ High power PoE++

IPMC-111PB++-60W, Bộ chuyển đổi quang điện công nghiệp, Industrial Media Converter, thiết bị chuyển đổi quang điện chuẩn công nghiệp, industrial fiber media converter, Bộ chuyển đổi quang điện DIN Rail, Bộ chuyển đổi quang điện PoE, Bộ chuyển đổi quang điện tốc độ Gigabit

IPMC-111PB++-60W , Công ty TNHH Công Nghệ - Tin Học Hoàng Vân, đại lý phân phối của hãng ORing tại Việt Nam, Distributor of ORing Taiwan

Chi tiết sản phẩm

MODEL:

IPMC-111PB++-60W

(End-of-life)

Industrial mini type Ethernet to fiber High power PoE++ media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

(Bộ chuyển đổi quang điện chuẩn công nghiệp, hỗ trợ High power PoE++, 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket)

Introduction
Specification
Order Information
Accessory
Download

Overview

IPMC-111PB++-60W is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB++-60W supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB++-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard 4-pair cable in an Ethernet network. Each IPMC-111PB++-60W has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB++-60W with wide operating temperature range from -40 ~ 75℃ and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

IPMC-111PB++-60W also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB++-60W will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB++-60W is reliable media converter with PoE capability and can satisfy most demand of operating environment.

Features

Supports 1 port 10/100Base-T(X) P.S.E. auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
P.S.E. fully compliant with IEEE802.3at standard, provide up to 60Watts
Supports store and forward transmission
Provided DIP-Switch to setting function and PoE mode selectable
High reliability and rigid IP-30 housing
DIN-Rail and wall mounting enabled

ORing Model	IPMC-111PB++-60W
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
100Base-X SFP port	1
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.3at PoE specification
Processing	Store-and-Forward
DIP Switch for function
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
DIP Switch for PoE mode
DIP Switch 1/2	DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode. DIP Switch 1/2 (ON) : PoE P.S.E set to syncronize mode(default)
LED Indicators
Power indicator	Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) 10Mbps or Link down Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disable
PoE indicator	Green for P.S.E. indicator
Power
Input power	Dual 50~57 VDC voltage power inputs at 4-pin terminal block
Power consumption (Typ.)	3 Watts (Not include P.D's device)
Overload current protection	Present
Reverse polarity protection	Present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)	228 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 75°C (-40 to 167°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMC	CE EMC (EN 55024, EN 55032), FCC Part 15 B
EMI	EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMS	EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
MTBF	2067004hr
Warranty	5 years by ORing

*Note1:

(1) By default, the output value of the high power PoE++ is in Sync mode which supports PoE af/at-compliant P.D. devices.

(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D mode. You may not connect to an af/at-compliant P.D. device with this mode.

Model Name	Description
IPMC-111PB++-60W	Industrial mini type Ethernet to fiber High power PoE++ media converter with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

DIN-Rail Power Supply
DRP048V060W1BN	60W DIN-Rail 48VDC/1.25A Power Supply with universal 100 to 240VAC input, extended type, -25~80°C
SDR-240-48	240W DIN-Rail 48VDC/5A Power Supply with 100 to 240VAC input , -25~70°C
SDR-480-48	480W DIN-Rail 48VDC/10A Power Supply with 100 to 240VAC input , -25~70°C

SFP Modules
SFP100-MM	100Mbps SFP optical transceiver, multi-mode / 2km, 1310nm
SFP100-MM-I	100Mbps SFP optical transceiver, multi-mode / 2km, 1310nm, industrial grade
SFP100-SS100	100Mbps SFP optical transceiver, single-mode / 100km, 1550nm
SFP100-SS100-I	100Mbps SFP optical transceiver, single-mode / 100km, 1550nm, industrial grade
SFP100-SS120	100Mbps SFP optical transceiver, single-mode / 120km, 1550nm
SFP100-SS120-I	100Mbps SFP optical transceiver, single-mode / 120km, 1550nm, industrial grade
SFP100-SS30	100Mbps SFP optical transceiver, single-mode / 30km, 1310nm
SFP100-SS30-I	100Mbps SFP optical transceiver, single-mode / 30km, 1310nm, industrial grade
SFP100-SS60	100Mbps SFP optical transceiver, single-mode / 60km, 1310nm
SFP100-SS60-I	100Mbps SFP optical transceiver, single-mode / 60km, 1310nm, industrial grade
SFP100B3-SS20-I	100Mbps SFP optical transceiver, single-mode BIDI / 20km, TX1310nm, RX1550nm, industrial grade
SFP100B3-SS40-I	100Mbps SFP optical transceiver, single-mode BIDI / 40km, TX1310nm, RX1550nm, industrial grade
SFP100B3-SS60	100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1310nm, RX1550nm
SFP100B3-SS60-I	100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1310nm, RX1550nm, industrial grade
SFP100B5-SS20-I	100Mbps SFP optical transceiver, single-mode BIDI / 20km, TX1550nm, RX1310nm, industrial grade
SFP100B5-SS40-I	100Mbps SFP optical transceiver, single-mode BIDI / 40km, TX1310nm, RX1550nm, industrial grade
SFP100B5-SS60	100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1550nm, RX1310nm, 0 ~ 70°C
SFP100B5-SS60-I	100Mbps SFP optical transceiver, single-mode BIDI / 60km, TX1550nm, RX1310nm, industrial grade