MODEL:
IGAR-1062+-4G
(End-of-life)
Industrial IEEE 802.11 a/b/g/n 4G LTE Cellular Router with 2x10/100/1000Base-T(X)
(Bộ định tuyến di động chuẩn công nghiệp VPN 4G LTE hỗ trợ POE P.D, Wifi và 2 cổng mạng 2x10/100Base-T(X))
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview |
IGAR-1062+-4G is a reliable IEEE 802.11 a/b/g/n WLAN 4G LTE router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem (GPRS/3G/3.5G/LTE Modem) dial up. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modems. In addition, IGAR-1062+-4G provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGAR-1062+-4G is one of the best solution for applications of wireless communication. |
Features |
|
Specifications | |
ORing AP Model | IGAR-1062+-4G |
Physical Ports | |
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
5-Pin Terminal Block |
2(DI x 4 and DO x 4) : |
PoE P.D. Port |
Present at ETH2 |
Sim Card Slot |
1 |
Cellular Interface | |
Antenna Connector |
1 x Reverse SMA Female |
Cellualr Standard | GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA /HSPA+ / LTE |
Band Option |
America(US grade) |
WLAN Interface | |
Antenna Connector | 2 x Reverse SMA Female |
Modulation |
IEEE802.11b: CCK/DQPSK/DBPSK |
Frequency Band |
America / FCC: |
Transmission Rate |
802.11b: 1/2/5.5/11 Mbps |
Transmit Power |
802.11a: 12dBm ± 1.5dBm@54Mbps |
Receiver Sensitivity |
802.11a : -76dBm ± 2dBm@54Mbps |
Encryption Security |
WEP: (64-bit ,128-bit key supported) |
Wireless Security | SSID broadcast disable |
LED Indicators | |
Power Indicator |
3 x LEDs, PWR1(2)(PoE) / Ready: |
10/100/1000Base-T(X) RJ45 Port Indicator |
2 x LEDs, |
WLAN LEDs |
Green Solid On: RF on, Blink: data transmitting |
WAN LEDs | Green On : Power is on and functioning Normal |
Fault | 1 x LED, Red for Ethernet link down or power down indicator |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Dual DC inputs. 12-48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 11 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.) |
Weight (g) | 1155 g |
Environmental | |
Storage Temperature | -40 to 85°C(-40 to 185°F) |
Operating Temperature | -25 to 70°C(-13 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-31 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 5 years |
Model Name | Description |
IGAR-1062+-4G_EU | Industrial IEEE 802.11 a/b/g/n 4G LTE Cellular Router with 2x10/100/1000Base-T(X) 1-port PoE P.D., EU band |
IGAR-1062+-4G_US | Industrial IEEE 802.11 a/b/g/n 4G LTE Cellular Router with 2x10/100/1000Base-T(X) 1-port PoE P.D., US band |
IGAR-1062+-4G_CH | Industrial IEEE 802.11 a/b/g/n 4G LTE Cellular Router with 2x10/100/1000Base-T(X) 1-port PoE P.D. CN band |
High Gain Omnidirectiona Antennas | ||
RFA-O10-NM-WA | Omni-directional High-gain Antenna, 5GHz, 10dBi max, N Male connector | |
RFA-O12-NF-WA | Omni-directional High-gain Antenna, 5GHz, 12dBi max, N Female connector with wall-mount bracket | |
RFA-O5-NM-WA | Omni-directional High-gain Antenna, 5GHz, 5dBi max, N Male connector | |
RFA-O7-NM-WG | Omni-directional High-gain Antenna, 2.4GHz, 7dBi max, N Male connector |
Omnidirectional Antennas | ||
RFA-O5-NF3-W3GGS-028 | Omni-directional High-gain Antenna, 5GHz, 10dBi max, N Male connector |
RF Antenna Base | ||
RFB-M2-1000 | N Female magnetic antenna base with cable length 10m and RP-SMA Male connector | |
RFB-M2-150 | N Female magnetic antenna base with cable length 1.5m and RP-SMA Male connector |
RF Cable | ||
RFC-SM-SMR-150 | Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector | |
RFC-NF-NM-1000 | Low loss RF Cable, Cable length 10m, N Male to N Male connector | |
RFC-NF-NM-500 | Low loss RF Cable, Cable length 5m, N Female to N Male connector | |
RFC-NM-NM-150 | Low loss RF Cable, Cable length 1.5m, N Male to N Male connector | |
RFC-NM-SMR-1000 | Low loss RF Cable, Cable length 10m, N Male to RP-SMA Male connector | |
RFC-NM-SMR-150 | Low loss RF Cable, Cable length 1.5m, N Male to RP-SMA Male connector | |
RFC-NM-SMR-500 | Low loss RF Cable, Cable length 5m, N Male to RP-SMA Male connector | |
RFC-SF-SMR-150 | Low loss RF Cable, Cable length 1.5m, SMA Female to RP-SMA Male connector | |
RFC-SFR-SMR-1000 | Low loss RF Cable, Cable length 10m, RP-SMA Female to RP-SMA Male connector | |
RFC-SJ-SMR-150 | Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector | |
RFC-NF-NM-50 | Low loss RF Cable, Cable length 0.5m, N Female to N Male connector |
Datasheet |
Preview |
Version | Release Date |
Size |
Download |
DataSheet_IGAR-1062+-4G.pdf |
No |
May 06, 2016 | 504.25KB | ||
UserManual |
Preview |
Version | Release Date |
Size |
Download |
User Manual_IGAR-1062+-3G(-4G)_IGAR-1662+-3G(-4G).pdf |
No |
V1.2 | May 05, 2016 | 1.87MB | |
QIG |
Preview |
Version | Release Date |
Size |
Download |
QIG_IGAR Series.pdf | No | V1.0 | May 05, 2016 | 529.38KB | |
Firmware |
Preview |
Version | Release Date |
Size |
Download |
FW_IGAR-1062+-4G.zip |
No |
V1.2d | May 06, 2016 | 26.89MB |