TGRS-T120-M12X-BP2-WV, EN50155 12-port managed router switch

ORing's TransporterTM series managed Router switches are designed for industrial applications such as rolling stock, vehicle, and railway.  The TGRS-T120-M12X-BP2-WV, which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 12x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement.  The switch support IEC 61375-2-5 TTDP (Train Topology Discovery Protocol) and IEC 61375-2-3 TRDP (Train Real-Time Data Protocol) for railway application, improving the operational efficiency and minimize configuration errors. It is specifically designed for the toughest industrial environments.  TGRS-T120-M12X-BP2-WV EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.  TGRS-T120-M12X-BP2-WV EN50155 provides a wide power input range from 24 to 110VDC.  TGRS-T120-M12X-BP2-WV includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss.  And support wide operating temperature from -25 oC to 70 oC. TGRS-T120-M12X-BP2-WV can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration.  Therefore, the router switch is one of the most reliable choice for highly-managed and railway application.

• Leading EN50155 compliant Ethernet switch for rolling stock application
• Supports static routing and VRRP L3 function
• Supports TTDP (IEC 61375-2-5) protocol
• Supports TRDP (IEC 61375-2-3) protocol
• Easy network setup with network address translation (NAT)
• R-NAT (Railway Network Address Translation) for train IP management
• Provided HTTPS/SSH protocol to enhance network security
• Supports SMTP client
• Supports QoS management
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
• Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
• Supports 10K Bytes Jumbo Frame
• Multiple notification for warning of unexpected event
• Web-based, Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
• Supports LLDP Protocol
• Rigid IP-30 housing design
• Wall mounting enabled
• Wide range power input from 24-110VDC

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

System Indicator (Status)

Green: System on

Ring Master Indicator (R.M.)

Green: Indicates that the system is operating in O-Ring Master mode (Pending)

O-Ring Indicator (Ring)

Green: Indicates that the system operating in O-Ring mode (Pending)
Green Blinking: Indicates that the Ring is broken.

Fault Indicator (Fault)

Amber: Indicate unexpected event occurred

10/100/1000Base-T(X) M12 Port Indicator

Green for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Green for speed indicator: Green for 1000Mbps, Off for 10/100Mbps

EN 55024 (IEC/EN 61000-4-2 (ESD: Contact 6KV, Air 8KV), IEC/EN 61000-4-3 (RS 80MHz to 1GHz: 20V/m, 1.4-2GHz:10V/m 1kHz 80% AM),IEC/EN 61000-4-4 (EFT Power 2KV, Single 2KV), IEC/EN 61000-4-5 (Surge: Power 2KV, RJ45 2KV), IEC/EN 61000-4-6 (CS 150K-80MHz: 10Vrms 1kHz 80% AM), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))

Datasheet

Preview

Size

Download

TGRS-T120-M12X-BP2-WV

UserManual

Preview

Size

Download

TGRS-T120-M12X-BP2-WV

QIG

Preview

Size

Download

TGRS-T120-M12X-BP2-WV