MODEL:
TES-3080-M12-BP2
EN50155 8-port managed Ethernet switch with 8x10/100Base-T(X), M12 connector and 2xbypass included
(Bộ chuyển mạch EN50155 Ethernet 8 cổng với 8x10/100Base-T(X),bao gồm 2xcổng bypass, đầu nối M12, có quản lý)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview |
ORingsTransporterTM series managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TES-3080-M12-BP2 is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments. TES-3080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. TES-1080-M12-BP2 included dual bypass ports, These bypass ports protect the network from failures and Network maintenance by ensuring network integrity during power loss. Each of these bypass ports includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operating mode of the Bypass ports is set to Normal , and the local networking device is connected with main-network. When power failure occurs, the Bypass ports is swiftly set to bypass mode to isolate the main-network from the local networking device. TES-3080-M12-BP2 can be managed centralized and convenient by a powerful windows utility ~ Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application. |
Features |
|
Specifications | |
ORing Switch Model | TES-3080-M12-BP2 |
Physical Ports | |
10/100 Base-T(X) Ports in M12 Auto MDI/MDIX | 8 x M12 connector (D-coding) |
RS-232 Serial Console Port |
RS-232 in M12 connector (A-coding). Baud rate setting: 9600bps, 8, N, 1 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table |
8192 MAC addresses |
Priority Queues |
4 |
Processing |
Store-and-Forward |
Switch Properties |
Switching latency: 7 μs |
Security Features |
Enable/disable ports, MAC based port security |
Software Feature |
STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) |
Network Redundancy |
O-Ring |
Warning / Monitoring System |
Relay output for fault event alarming |
LED Indicators | |
Power Indicator | Green : Power LED x 2 |
R.M. Indicator |
Green : Indicate system operated in O-Ring Master mode |
Ring Indicator | Green : indicate system operated in O-Ring mode |
Fault Indicatorr |
Amber : Indicate unexpected event occurred |
10/100Base-T(X) M12 Port Indicator |
Green for port Link/Act. Amber for Duplex/Collision |
Fault contact | |
Relay |
Relay output to carry capacity of 3A at 24VDC on M12 connector (A-coding) |
Power | |
Redundant Input Power | Dual 12~48VDC on 5-pin M23 connector |
Power Consumption (Typ.) | 5 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x D x H) | 155 (W) x 65 (D) x 196 (H) |
Weight (g) | 894 g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27, EN61373 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6, EN61373 |
Safety | EN60950-1 |
Warranty | 5 years |
Model Name | Description |
TES-3080-M12-BP2 | EN50155 8-port managed Ethernet switch with 8x10/100Base-T(X), M12 connector and 2xbypass included |
DBU-01 Series | ||
DBU-01-M12 | Device Configuration Backup Unit for ORing switch/AP/AR device with M12 connector |
DBU-01 Series | ||
NDR-120-12 | 120W DIN-Rail 12VDC/10A (voltage adjustable 12~14VDC) Power Supply with universal 100 to 240VAC input, -20~70°C | |
NDR-120-24 | 120W DIN-Rail 24VDC/5A (voltage adjustable 24~28VDC) Power Supply with universal 100 to 240VAC input, -20~70°C | |
NDR-120-48 | 120W DIN-Rail 48VDC/2.5A (voltage adjustable 48~55VDC) Power Supply with universal 100 to 240VAC input, -20~70°C | |
NDR-75-12 | 75W DIN-Rail 12VDC/6.3A (voltage adjustable 12~14VDC) Power Supply with universal 100 to 240VAC input, -20~70°C | |
NDR-75-24 | 75W DIN-Rail 24VDC/3.2A (voltage adjustable 24~28VDC) Power Supply with universal 100 to 240VAC input, -20~70°C | |
NDR-75-48 | 75W DIN-Rail 48VDC/1.6A (voltage adjustable 48~55VDC) Power Supply with universal 100 to 240VAC input, -20~70°C |
Open-Vision 4.0 | ||
Open-Vision 50 | Powerful Network Management Windows Utility Suit, 50 IP devices |
DIN-Rail Power Supply | ||
SDR-240-48 | 240W DIN-Rail 48VDC/5A Power Supply with 100 to 240VAC input , -25~70°C | |
SDR-480-48 | 480W DIN-Rail 48VDC/10A Power Supply with 100 to 240VAC input , -25~70°C |
Datasheet |
Preview |
Version | Release Date |
Size |
Download |
DataSheet_TES-3080-M12-BP2 SERIES_V2.1a.pdf | See detail
TES-3080-M12(-BP2) SERIES |
V2.1a | Feb 11, 2022 | 1.27MB | |
UserManual |
Preview |
Version | Release Date |
Size |
Download |
User Manual_TES-3080-M12(-BP2) SERIES_V4.1.pdf | See detail
TES-3080-M12(-BP2) SERIES |
V4.1 | Feb 11, 2022 | 3.11MB | |
QIG |
Preview |
Version | Release Date |
Size |
Download |
QIG_TES-3080-M12(-BP2) SERIES_1907-200-S3080M12X2-FX010.pdf | See detail
TES-3080-M12(-BP2) SERIES |
V2.0 | Feb 11, 2022 | 880.46KB | |
Firmware |
Preview |
Version | Release Date |
Size |
Download |
FW_TES-3080-M12,.zip | See detail
1.fix couple ring issue 2.improve send syslog fail retry 3.improve IGMP and add unknown multicast filter 4.Support mix multicast IP filter for dynamic IGMP and static multicast filter table |
K3.12 | Dec 13, 2016 | 715.96KB |