MODEL:
INJ-102GT-24V
Industrial 2-port Gigabit High Power PoE Injector,12V~57V Input Support
(Bộ chuyển đổi nguồn PoE High Power Gigabit 2 cổng chuẩn công nghiệp, hỗ trợ nguồn vào 12~57V)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview |
The INJ-102GT-24V PoE Injector is not only an IEEE802.3at compliant device with intelligent detection that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/af compliant device can be powered with the INJ-102GT-24V PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 12~57V insertion, the installer doesn't need to worry about voltage drops caused by cable length. The INJ-102GT-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/af PoE standards. |
Note: P.D. side must be fully compliant IEEE 802.3at/af standard in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).
Features |
|
Specifications | |
ORing Injector Model | INJ-102GT-24V |
Physical Ports | |
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input | 2 |
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output |
2 |
Operating Voltage | |
Input Voltage | 12 ~ 57 Vdc on 4-pin terminal block |
Output Power | 50V / 600mA, 30 Watts max. Per port |
LED Indicator | |
Power Indicator | PWR / Ready: 1 x LED Green On: Power is on and functioning Normally. |
PoE Indicators | 2 x LED Blue On: PoE Device Link Blue Blinking: Detecting PoE Device Blue Off : None PoE Device Detected |
Protection | |
Short Circuit Protection | Present |
Over Load Protection | Present |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.) |
Weight (g) | 370 g |
Environmental | |
Storage Temperature | -40 to 80°C (-40 to 176°F) |
Operating Temperature | -20 to 70°C (-4 to 158°F) |
Operating Humidity | 5% to 90% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, |
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Model Name | Description |
INJ-102GT | Industrial 2-port Gigabit High Power PoE Injector |
INJ-102GT-24V | Industrial 2-port Gigabit High Power PoE Injector,12V~57V Input Support |
Datasheet |
Preview |
Version | Release Date |
Size |
Download |
Datasheet_INJ-102GT-24V.pdf | No | V1.0 | Apr 19, 2017 | 998.25KB | |
QIG |
Preview |
Version | Release Date |
Size |
Download |
QIG_INJ-102GT-24V.pdf | No | V1.0 | May 11, 2016 | 334.59KB |