INJ-102GT++-24V, Industrial 2-port Gigabit High Power Plus PoE++ Injector, 24V

Thiết bị chuyển mạch công nghiệp IEC 61850-3, Industrial Ethernet Switch IEC 61850-3, switch công nghiệp IEC 61850-3, industrial switch,

Switch POE công nghiệp IEC 61850-3, POE Switch chuyển mạch Ethernet, Gigabit Ethernet switch, bộ chuyển mạch công nghiệp chuẩn IEC 61850-3

INJ-102GT++-24V | Công ty TNHH Công Nghệ và Tin học Hoàng Vân

INJ-102GT++-24V, Thiết bị chuyển mạch công nghiệp IEC 61850-3, Industrial Ethernet Switch IEC 61850-3, switch công nghiệp IEC 61850-3, industrial switch, Switch POE công nghiệp IEC 61850-3, POE Switch chuyển mạch Ethernet, Gigabit Ethernet switch, bộ chuyển mạch công nghiệp chuẩn IEC 61850-3
INJ-102GT++-24V, Bộ chuyển đổi nguồn PoE++ High Power Plus Gigabit 2 cổng chuẩn công nghiệp, 24V
Menu

Chi tiết sản phẩm

MODEL:

INJ-102GT++-24V

Industrial 2-port Gigabit High Power Plus PoE++ Injector, 24V

(Bộ chuyển đổi nguồn PoE++ High Power Plus Gigabit 2 cổng chuẩn công nghiệp, 24V)

  • Introduction
  • Specification
  • Order Information
  • Accessory
  • Download
Overview

 

The INJ-102GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 2-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT++ PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-102GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

Note:The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+)

 

 

Features

 

  • PoE+Injector for 1x10/100/1000 Base-T(X)
  • Fully compliant with IEEE802.3at/802.3af standard
  • Auto protection for Over Voltage Power Input and over current output
  • Supports totally Power Output up to 90/180Watts for all ports usage
  • High reliability and rigid IP-30 housing
  • DIN-Rail and Wall Mount Design

 

Specifications
ORing Media Converter Model INJ-102GT++ INJ-102GT++-24V
Physical Ports  
RJ-45 Ethernet Port Input 2
RJ-45 Ethernet Port with P.S.E. Output 2
Operating Voltage   
Input Voltage 50 ~ 57 Vdc on 4-pin terminal block 12 ~ 57 Vdc on 4-pin terminal block
Output Power

57V / 1.6A, 90 Watts max.
(Total of 2 ports)

12 ~ 24VDC power input : 60 Watts totally

24 ~ 57VDC power input : 90 Watts totally

(Total of 2 ports)

LED Indicator   
Power Indicator PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally.
PoE Indicators 2 x LED
Blue On: PoE Device Link
Blue Off : None PoE Device Detected
Protection   
Short Circuit Protection Present
Over Load Protection Present
Physical Characteristics   
Enclosure IP-30
Dimensions (W x D x H) 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch) 41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.)
Weight (g) 300g 369g
Environmental   
Storage Temperature -40 to 80°C (-40 to 176°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 5% to 90% Non-condensing
Regulatory  Approvals   
EMI FCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty by ORing 5 years
Model Name Description
INJ-102GT++ Industrial 2-port Gigabit High Power Plus PoE++ Injector
INJ-102GT++-24V Industrial 2-port Gigabit High Power Plus PoE++ Injector
DIN-Rail Power Supply
DR-120-48 120W DIN-Rail 48VDC/2.5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C
DR-75-48 75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input, -10~60°C

 

Datasheet

Preview

Version Release Date

Size

Download

Datasheet_INJ-102GT++ Series.pdf No v1.1 Nov 12, 2018 1.05MB

QIG

Preview

Version Release  Date

Size

Download

QIG_INJ-102GT++ Series.pdf No V1.2 Nov 12, 2018 439.08KB

Sản phẩm cùng loại
Icon Facebook
Kinh Doanh
Ms. Diễm
0839358385
Kinh doanh
Ms. Tuyền
0972066416
Kinh Doanh
Mr. Hùng
0912410533
Kỹ thuật
Mr. Trung
0917727008
Kỹ thuật
Mr. Thông
0916202479
Go Top