INJ-101GT++-60W-24V | Bộ chuyển đổi nguồn PoE++ High Power Gigabit 1 cổng chuẩn công nghiệp, 9 đến 57VDC

Chi tiết sản phẩm

MODEL:

INJ-101GT++-60W-24V

Industrial 1-port Gigabit High Power PoE++ Injector, 9 to 57VDC

(Bộ chuyển đổi nguồn PoE++ High Power Gigabit 1 cổng chuẩn công nghiệp, 9 đến 57VDC)

Introduction
Specification
Order Information
Accessory
Download

Overview

The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.

Features

PoE++ Injector for 1x10/100/1000Base-T(X)
Fully compliant with IEEE802.3at/802.3af standard
Auto protection for Over Voltage Power Input and over current output
Supports totallyPower Output up to 60Watts for all ports usage.
Support wide range power input, 9 to 57VDC
Provided DIP switch configurator for PoE mode management
High reliability and rigid IP-30 housing
DIN-Rail and Wall Mount Design

Specifications
ORing Injector Model	INJ-101GT++-60W-24V
Physical Ports
RJ-45 Ethernet Port Input	1
RJ-45 Ethernet Port with P.S.E. Output	1
Operating Voltage
Input Voltage	9 ~ 57 VDC on 4-pin terminal block
LED Indicators
Power Indicator	PWR / Ready: 1 x LED Green On: Power is on and functioning Normally.
PoE Indicators	1 x LED Blue On: PoE Device Link Off : None PoE Device Detected Blink (Blue) : Overload present
DIP Switch
DIP Switch 1/2	DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode DIP Switch 1/2 (ON) : PoE P.S.E set to syncronize mode(default)
Power
Input Power	9 ~ 57 VDC on 4-pin terminal block
Power Consumption	1 Watts (Not include PD's device)
PoE Power Budget	30Watt at 9~24VDC, 60Watt at 24~57VDC
Protection
Short Circuit Protection	Present
Over Load Protection	Present
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	41(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)	318 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 75°C (-40 to 167°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMC	CE EMC (EN55024,EN 55032), FCC Part 15 B
EMI	EN55032, CISPR 32, EN61000-3-2, EN61000-3-3, FCC Part 15 B class A
EMS	EN55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8 (PFMF), IEC/EN 61000-4-11 (DIP)
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
MTBF	2067004hrs
Warranty by ORing	5 years

*Note1: (1) By default, the output value of the high power PoE++ is in Sync mode which supports PoE af/at-compliant P.D. devices.

(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D mode. You may not connect to an af/at-compliant P.D. device with this mode.

Model Name	Description
INJ-101GT++-60W-24V	Industrial 1-port Gigabit High Power PoE++ Injector, 9 to 57VDC
INJ-101GT++-60W	Industrial 1-port Gigabit High Power PoE++ Injector

DIN-Rail Power Supply
DR-120-24	120W DIN-Rail 24VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C
DR-75-24	75W DIN-Rail 24VDC/3.2A Power Supply with universal 100 to 240VAC input, -10~60°C

Datasheet	Preview	Version	Release Date	Size	Download
DataSheet_INJ-101GT++-60W-24V.pdf	No	V1.0	Jul 27, 2018	890.06KB
QIG	Preview	Version	Release Date	Size	Download
QIG_ INJ-101GT++-60W-24V.pdf	No	V1.0	Jul 27, 2018	459.85KB

Sản phẩm cùng loại

INJ-102GT

IGPS-9084GP-LA

IGPS-9084GP

IPS-1042FX-SS-SC-24V

Trang đầu
<
1
2
3
4
5
6
>
Trang cuối

INJ-101GT++-60W-24V, switch POE công nghiệp, Industrial 1-port Gigabit High Power PoE++ Injector

Gigabit Ethernet switch, bộ chuyển mạch công nghiệp chuẩn IEC 61850-3

Thiết bị chuyển mạch công nghiệp IEC 61850-3, Industrial Ethernet Switch IEC 61850-3, switch công nghiệp IEC 61850-3, industrial switch, Switch POE công nghiệp IEC 61850-3, POE Switch chuyển mạch Ethernet

INJ-101GT++-60W-24V | Bộ chuyển đổi nguồn PoE++ High Power Gigabit 1 cổng chuẩn công nghiệp, 9 đến 57VDC

INJ-101GT++-60W-24V, Bộ chuyển đổi nguồn PoE++ High Power Gigabit 1 cổng chuẩn công nghiệp, 9 đến 57VDC