INJ-101GT++-60W, Industrial POE switch

Switch POE công nghiệp IEC 61850-3, POE Switch chuyển mạch Ethernet, Gigabit Ethernet switch, bộ chuyển mạch công nghiệp chuẩn IEC 61850-3

Thiết bị chuyển mạch công nghiệp IEC 61850-3, Industrial Ethernet Switch IEC 61850-3, switch công nghiệp IEC 61850-3, industrial switch

INJ-101GT++-60W | Bộ chuyển đổi nguồn PoE++ High Power Gigabit 1 cổng chuẩn công nghiệp

INJ-101GT++-60W, Thiết bị chuyển mạch công nghiệp IEC 61850-3, Industrial Ethernet Switch IEC 61850-3, switch công nghiệp IEC 61850-3, industrial switch, Switch POE công nghiệp IEC 61850-3, POE Switch chuyển mạch Ethernet, Gigabit Ethernet switch, bộ chuyển mạch công nghiệp chuẩn IEC 61850-3
Công ty TNHH Công Nghệ và Tin học Hoàng Vân chuyên INJ-101GT++-60W tốt nhất thị trường
Menu

Chi tiết sản phẩm

MODEL:

INJ-101GT++-60W

Industrial 1-port Gigabit High Power PoE++ Injector

(Bộ chuyển đổi nguồn PoE++ High Power Gigabit 1 cổng chuẩn công nghiệp)

  • Introduction
  • Specification
  • Order Information
  • Accessory
  • Download
Overview

The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.

 

Features
  • PoE++ Injector for 1x10/100/1000Base-T(X)
  • Fully compliant with IEEE802.3at/802.3af standard
  • Auto protection for Over Voltage Power Input and over current output
  • Supports totallyPower Output up to 60Watts for all ports usage.
  • Provided DIP switch configurator for PoE mode management
  • High reliability and rigid IP-30 housing
  • DIN-Rail and Wall Mount Design
Specifications
ORing Injector Model INJ-101GT++-60W
Physical Ports  
RJ-45 Ethernet Port Input 1
RJ-45 Ethernet Port with P.S.E. Output 1
Operating Voltage  
Input Voltage 50 ~ 57 VDC on 4-pin terminal block
LED Indicators  
Power Indicator PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally.
PoE Indicators 1 x LED
Blue On: PoE Device Link
Off : None PoE Device Detected
Blink (Blue) : Overload present
DIP Switch  
DIP Switch 1/2

DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode

DIP Switch 1/2 (ON) : PoE P.S.E set to syncronize mode(default)
Power  
Input Power 50 ~ 57 VDC on 4-pin terminal block
Power Consumption 1 Watts (Not include PD's device)
PoE Power Budget 60 Watts max
Protection  
Short Circuit Protection Present
Over Load Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g) 188 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMC EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3
EMI CISPR 32, EN55032, FCC Part 15B class A
EMS

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

*Note1: (1) By default, the output value of the high power PoE++ is in Sync mode which supports PoE af/at-compliant P.D. devices.

(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D mode. You may not connect to an af/at-compliant P.D. device with this mode.

Model Name Description
INJ-101GT++-60W-24V Industrial 1-port Gigabit High Power PoE++ Injector, 9 to 57VDC
INJ-101GT++-60W Industrial 1-port Gigabit High Power PoE++ Injector
DIN-Rail Power Supply
DR-120-48 120W DIN-Rail 48VDC/2.5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C
DR-75-48 75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input, -10~60°C
DRP048V120W1BN 120W DIN-Rail 48VDC/2.5A Power Supply with universal 100 to 240VAC input, extended type, -25~80°C
Power Adapter
PAA-482500 48VDC/2500mA 120W Power Adapter with universal 100 to 240VAC input, US power cord, -30~70°C
PAA-502400 50VDC/2400mA 120W Power Adapter with universal 100 to 240VAC input, US power cord, -10~50°C
PAE-482500 48VDC/2500mA 120W Power Adapter with universal 100 to 240VAC input, EU power cord, -30~70°C
PAE-502400 50VDC/2400mA 120W Power Adapter with universal 100 to 240VAC input, EU power cord, -10~50°C

Datasheet

Preview

Version Release Date

Size

Download

Datasheet_INJ-101GT++-60W.pdf

No

V2.0 Sep 05, 2017 898.64KB

QIG

Preview

Version Release  Date

Size

Download

QIG_INJ-101GT++-60W.pdf

No

V1.0 Sep 05, 2017 296.51KB

Sản phẩm cùng loại
Icon Facebook
Kinh Doanh
Ms. Diễm
0839358385
Kinh doanh
Ms. Tuyền
0972066416
Kinh Doanh
Mr. Hùng
0912410533
Kỹ thuật
Mr. Trung
0917727008
Kỹ thuật
Mr. Thông
0916202479
Go Top