IGPS-9084GP-LA-PN, PROFINET CC-B Ethernet Switch with 8GE PoE and 4G SFP, IEEE 802.3af/at

Overview

 IGPS-9084GP-LA-PN is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-LA-PN also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.  And support wide operating temperature from -40 oC to 75 oC.  IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.

Features

•  Support O-Ring(recovery time < 30ms over 250 units of connection) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
• Open-Ringsupport the other vendor's ring technology in open architecture
• O-Chain allow multiple redundant network rings
• Support standard IEC 62439-2 MRP*note  (Media Redundancy Protocol) function
• 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
• Support PoE on/off scheduled configuration
• Support PoE alive check and auto reboot fuction
• Support IPV6 new internet protocol version
• Support EtherNet/IP™ and Modbus TCP protocol
• Support IEEE 802.3az Energy-Efficient Ethernet technology
• Provided HTTPS/SSH protocol to enhance network security
• Support SMTP client and NTP server protocol
• Support IP-based bandwidth management
• Support application-based QoS management
• Support Device Binding security function
• Support DOS/DDOS auto prevention
• Support auto-negotiation and auto-MDI/MDIX
• Support full and half duplex mode
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
• Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
• Support ACL, TACACS+ and 802.1x User Authentication for security
• Support 9.6K Bytes Jumbo Frame
• Syslog/SNMP Trap notification for warning of unexpected event
• Support DBU-01 backup unit device to quickly backup/restore configuration
• Web-based ,SNMP v1/v2c/v3, Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
• Support LLDP Protocol
• Robust EMS design, provide 8K ESD and 4KV Surge protection
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
• PROFINET CC-B v2.40 certified and GSD file provided
• Support PROFINET MRP client (MRC)

*NOTE: This function is available by request only

Specifications

ORing Switch Model

IGPS-9084GP-LA-PN

Physical Ports

10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX

8

100/1000Base-X with SFP port

4

Technology

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

PoE Power Supply Type

Endspan mode

PoE Power Output

Per port 56V DC, 350mA. Max. 15.4 watts (IEEE 802.3af),
Per Port 56V DC, 590mA. Max. 30 watts (IEEE 802.3at)

MAC Table

8K

Priority Queues

8

Processing

Store-and-Forward

Buffer Size

4Mbit

Switch Properties

Switching latency: 7 us
Switching bandwidth: 24Gbps
Throughput (packet per second) : 17.856Mpps@64Bytes packet
Max. Number of Available VLANs: 4096
VLAN ID Range : VID 0 to 4095
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define

Jumbo frame

Up to 9.6K Bytes

Security Featues

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
EtherNet/IP™
NTP server

Network Redundancy

O-Ring
Open-Ring
O-Chain
*note MRP
MSTP (RSTP/STP compatible)

PROFINET conformance class

Conformance-class B

RS-232 Serial Console Port

RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1

LED Indicators

Power Indicator (PWR)

Green : Power LED x 3

Ring Master Indicator (R.M.)

Green : Indicates that the system is operating in O-Ring Master mode

O-Ring Indicator (Ring)

Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.

Fault Indicator

Amber : Indicate unexpected event occurred

10/100/1000Base-T(X) RJ45 port Indicator

Green for Port LINK/ACT indicator
Dual color LED for speed indicator: Green for 1000Mbps / Amber for 100Mbps / off-light for 10Mbps

100/1000Base-X SFP port Indicator

Green for port Link/Act..

PoE Indicator

Green : PoE enabled LED x 8

Fault contact

Relay

Relay output to carry capacity of 1A at 24VDC

Reset Function

Reset Button

< 5 sec: System reboot, > 5 sec: Factory default

Power

Redundant Input Power

50/57VDC on 6-pin terminal block

Power Consumption (Typ.)

13.2 Watts

PoE budget

240W max, 30W/per port

Overload Current Protection

Present

Reverse polarity protection

Present

Hi-POT

1.5KV AC

Physical Characteristics

Enclosure

IP-30

Dimensions (W x D x H)

54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)

Weight (g)

779g

Environmental

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals

EMC

CE EMC (EN 55024, EN 55032), FCC Part 15B

EMI

EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A

EMS

EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)

Shock

IEC60068-2-27

Free Fall

IEC 60068-2-31

Vibration

IEC60068-2-6

Safety

EN60950-1

MTBF

516416hrs

Model Name

IGPS-9084GP

Industrial 12-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X, SFP socket

IGPS-9084GP-LA-PN

Industrial Slim 12-port Secured managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-SFP, PROFINET Version

IGPS-9084GP-LA

Industrial Slim 12-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X, SFP socket, Generic version

Datasheet

Version

Release Date

Size

July 06, 2023