MODEL:
IGPS-9080
(End-of-life)
Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E.
(Bộ chuyển mạch Gigabit PoE Ethernet chuẩn công nghiệp 8 cổng với 8x10/100/1000Base-T(X) P.S.E., có quản lý)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview |
IGPS-9080 series are managed redundant ring PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9080 series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9080 series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40°C to 75°C. IGPS-9080 series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for highly-managed Ethernet application.
|
Features |
|
Specifications | ||||
ORing Switch Model | IGPS-9080 | IGPS-9080-NP | IGPS-9080-24V | IGPS-9080-NP-24V |
Physical Ports | ||||
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX |
8 | |||
Technology | ||||
Ethernet Standards |
IEEE 802.3 for 10Base-T |
|||
PoE Output Watts |
240 Watts Max. |
12 ~24VDC : 60Watts Max. |
||
MAC Table | 8K | |||
Priority Queues | 8 | |||
Processing | Store-and-Forward | |||
Switch Properties |
Switching latency: 7 μs |
|||
Jumbo frame | Up to 9.6K Bytes | |||
Security Featues |
Device Binding security feature |
|||
Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s) |
|||
Network Redundancy |
O-Ring |
|||
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 | |||
LED Indicators | ||||
Power Indicator | Green : Power LED x 3 | |||
Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode | |||
O-Ring Indicator (Ring) |
Green : Indicates that the system operating in O-Ring mode |
|||
Fault Indicator (Fault) | Amber : Indicates unexpected event occurred | |||
10/100/1000Base-T(X) RJ45 port indicator |
Green for port Link/Act. |
|||
PoE indicator | Green for PoE power injected | |||
Fault Contact | ||||
Relay | Relay output to carry capacity of 1A at 24VDC | |||
Power | ||||
Redundant Input Power | Dual DC inputs. 50~57VDC on 6-pin terminal block | Dual DC inputs. 12~57VDC on 6-pin terminal block | ||
Power Consumption (Typ.) | 11 Watts | 11 Watts | 12 Watts | 12 Watts |
Overload Current Protection | Present | |||
Reverse Polarity Protection | NOT Present | |||
Physical Characteristics | ||||
Enclosure | IP-30 | |||
Dimensions (W x D x H) | 54.1(W)x106.1(D)x145.4(H) mm (2.13x4.18x5.72 inch.) | |||
Weight (g) | 773 g | 771 g | 779 g | 777 g |
Environmental | ||||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |||
Operating Temperature | -40 to 75°C (-40 to 167°F) | |||
Operating Humidity | 5% to 95% Non-condensing | |||
Regulatory Approvals | ||||
EMI | FCC Part 15, CISPR (EN55022) class A | |||
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |||
Shock | IEC60068-2-27 | |||
Free Fall | IEC60068-2-32 | |||
Vibration | IEC60068-2-6 | |||
Safety | EN60950-1 | |||
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 311,532 | |||
Warranty by ORing | 5 years |
*NOTE: This function is available by request only
Model Name | Description |
IGPS-9080-24V | Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. |
IGPS-9080 | Industrial 8-port managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. |