MODEL:
IGPS-1080A
(End-of-life)
Industrial 8-port slim type unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E.
(Bộ chuyển mạch Gigabit PoE Ethernet chuẩn công nghiệp 8 cổng với 8x10/100/1000Base-T(X) P.S.E, Dạng Slim, Không quản lý)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview |
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application. IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. |
Features |
|
Specifications | |
ORing Switch Model | IGPS-1080A |
Physical Ports | |
10/100/1000Base-T(X) Ports in RJ45 With P.S.E. | 8 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
Switching Bandwidth | 16Gbps |
MAC Table | 4K MAC addresses |
Processing | Store-and-Forward |
Jumbo Frame | 9KBytes |
LED Indicators | |
Power Indicator | Green : Power LED x 2 |
Fault Indicator | Amber : Indicate PWR1 or PWR2 failure |
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator | Green for port Link/Act. Green for PoE power injected. |
Fault contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
DIP-Switch | |
DIP-Switch 1 | Power-1 failed warning : (ON) enable, (OFF) disable |
DIP-Switch 2 | Power-2 failed warning : (ON) enable, (OFF) disable |
Power | |
Redundant Input power | Dual DC inputs. 50~57VDC on 6-pin terminal block. |
Power consumption (Typ.) | 8 Watts (power device not included) |
PoE Power budget | 180Watts |
Overload current protection | Present |
Reverse polarity protection | Present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x D x H) |
26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch) |
Weight (g) |
442g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory approvals | |
EMC | CE EMC (EN55024,EN 55032), FCC Part 15 B |
EMI | EN55032, CISPR 32, EN61000-3-2, EN61000-3-3, FCC Part 15 B class A |
EMS |
EN55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8 (PFMF), IEC/EN 61000-4-11 (DIP) |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-31 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 665,276 |
Warranty | 5 years |
Order information
Model Name | Description |
IGPS-1080A | Industrial 8-port slim type unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. |
Accessory
DIN-Rail Power Supply | ||
DR-120-48 | 120W DIN-Rail 48VDC/2.5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C | |
DR-75-48 | 75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input, -10~60°C | |
DRP048V120W1BN | 120W DIN-Rail 48VDC/2.5A Power Supply with universal 100 to 240VAC input, extended type, -25~80°C | |
DRP048V240W1BN | 240W DIN-Rail 48VDC/5A Power Supply with universal 100 to 240VAC input, extended type, -25~80°C | |
SDR-240-48 | 240W DIN-Rail 48VDC/5A Power Supply with 100 to 240VAC input , -25~70°C | |
SDR-480-48 | 480W DIN-Rail 48VDC/10A Power Supply with 100 to 240VAC input , -25~70°C |