IGPS-1042GP-24V, Industrial 6-port unmanaged Gigabit PoE Ethernet switch

IGPS-1042GP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 12~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 75°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

• IGPS-1042GP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
• Advanced PoE power boost technology to support dual 24VDC power inputs
• SFP port supports 100Base-FX and 1000Base-X speed
• Supports auto-negotiation and auto-MDI/MDI-X
• Supports store and forward transmission
• Supports flow control
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
• Supports Jumbo Frame up to 10K Bytes

IGPS-1042GP-24V

10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX

100/1000Base-X SFP port

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

Power indicator

Green : Power LED x 2

Amber : Indicates PWR1 or PWR2 failure occurred

10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4)

Green for port Link/Act.
Green for PoE power injected

100/1000Base-X SFP port indicator (P5 ~ P6)

Green for port Link/Act.

SFP Speed DIP-Switch

DIP-Switch 1/2

DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps

Relay Output DIP-Switch

DIP-Switch 1

Power-1 failed warning : (ON) enable, (OFF) disable

DIP-Switch 2

Power-2 failed warning : (ON) enable, (OFF) disable

Relay output to carry capacity of 1A at 24VDC

Dual DC inputs. 12~57VDC on 6-pin terminal block.

7 Watts

60Watts at 12~24VDC, 120Watts at 24~57VDC

Overload current protection

Reverse polarity protection

Present

Physical Characteristics

41 (W) x 94.9 (D) x 144.3(H) mm (1.61 x 3.74 x 5.68 inches)

650 g

-40 to 85°C (-40 to 185°F)

-40 to 75°C (-40 to 167°F)

5% to 95% Non-condensing

FCC Part 15, CISPR (EN55032) class A, EN55024

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

IEC60068-2-27

IEC60068-2-32

IEC60068-2-6

EN60950-1

Datasheet

Preview

Version

Release Date

Size

Download

QIG

Preview

Version

Release Date

Size

Download