MODEL:
IDS-311F-SS
Industrial secure serial port to Ethernet device, 1xRS-232/422/485 to 1x10/100Base-T(X) and 1x100Base Fiber, Singlemode
(Bộ chuyển đổi 1 cổng RS-232/422/485 sang 1 cổng Ethernet đồng + 1 cổng Ethernet quang Singlemode, Serial device server / Terminal server)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview
IDS-311F is an innovative secure 1 port RS-232/422/485 to 1 port LAN and 1 port fiber device server with standard features of device server. In addition, IDS-311F features HTTPS to assure the security of critical data transmission
IDS-311F supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. With wide operating temperature, -40~70℃, and rugged IP-30 housing design, IDS-311F series could operate in the harsh industrial environment. Therefore, IDS-311F is the best solution to the high demand of secure serial to Ethernet critical data communication.
Features
- Operating Modes: Virtual Com, Serial Tunnel, TCP Server,TCP Client, UDP and Modbus Gateway
- Support Modbus Gateway: Modbus TCP, Modbus RTU and Modbus ASCII
- Support 1xRS-232/422/485 in DB9 connector
- IP Access: IP White List
- Event Warning by Syslog, Email and SNMP trap
- Configurable by Web-based and Windows utility (DS-Tool)
- Various Windows O.S. supported:
Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit) - Support OpenWRT SDK for project
ORing Device Server Model | IDS-311F-MM | IDS-311F-SS | |
Physical Ports | |||
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 1 | ||
Fiber Ports Specification | |||
|
Fiber Ports Number | 1 | 1 |
Fiber Ports Standard | 100Base - FX | 100Base - FX | |
Fiber Optical Connector | SC or ST | ||
Fiber Mode | Multi-mode | Single-mode | |
Fiber Mode |
62.5/125 μm |
9/125 μm | |
Fiber Diameter (μm) | SC | SC | |
Typical Distance (Km) | 2 km | 30 km | |
Wavelength (nm) | 1310 nm | 1310 nm | |
Max. Output Optical Power (dbm) | -14 dBm | -8 dBm | |
Min. Output Optical Power (dbm) | -23.5 dBm | -15 km | |
Max. Input Optical Power (Saturation) |
0 dBm | 0 dBm | |
Max. Input Optical Power (Saturation) |
0 dBm | 0 dBm | |
Link Budget (db) | 7.5 db | 19 db | |
Serial Ports | |||
Connector |
DB9(male) x 1 |
||
Operation Mode | RS-232/422/485 | ||
Serial Baud Rate | 110 bps to 460.8 Kbps | ||
Data Bits | 7, 8 | ||
Parity |
odd, even, none, mark, space |
||
Stop Bits | 1, 1.5, 2 | ||
RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
||
RS-422 |
Tx-, Tx+, Rx+, Rx- |
||
RS-485 |
4 wire: Tx-, Tx+, Rx+, Rx- 2 wire: Data-, Data+ |
||
Flow Control | XON/XOFF, RTS/CTS, DTR/DSR | ||
Network Protocol | |||
Protocol | ICMP, IP, TCP, UDP, DHCP, BOOTP, DNS, SNMP V1/V2c, HTTPS, SMTP | ||
LED Indicators | |||
Power Indicator |
2 x LEDs, PWR 1(2) / Ready: |
||
10/100TX RJ45 port indicator (Eth1) | Green for port Link/Act | ||
100Base-FX Fiber Port Indicator (Eth2) |
Green for port Link/Act |
||
Serial TX / RX LEDs: |
Amber: Serial port is receiving data |
||
Power | |||
Redundant Input Power | Dual DC inputs. +12 to 48VDC on 4-pin terminal block | ||
Power Consumption (Typ.) | 3.98 watts | ||
Overload Current Protection | Present | ||
Reverse Polarity Protection | Present on terminal block | ||
Physical Characteristics | |||
Enclosure | IP-30 | ||
Dimensions (W x D x H) | 45 (W) x 81 (D) x 95 (H) mm | ||
Weight (g) | 309 g | ||
Environmental | |||
Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
Operating Temperature | -40 to 70°C (-40 to 158°F) | ||
Operating Humidity | 5% to 95% Non-condensing | ||
Regulatory Approvals | |||
EMI | FCC Part 15, CISPR (EN55022) class A | ||
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
||
Shock | IEC60068-2-27 | ||
Free Fall | IEC60068-2-32 | ||
Vibration | IEC60068-2-6 | ||
Safety | EN60950-1 | ||
Warranty | 5 years |
Model Name | Description |
IDS-311F-SS | Industrial secure serial port to Ethernet device, 1xRS-232/422/485 to 1x10/100Base-T(X) and 1x100Base Fiber, Singlemode |
IDS-311F-MM | Industrial secure serial port to Ethernet device, 1xRS-232/422/485 to 1x10/100Base-T(X) and 1x100Base Fiber, Multimode |
DIN-Rail Power Supply | ||
DR-120-12 | 120W DIN-Rail 12VDC/10A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C | |
DR-120-24 | 120W DIN-Rail 24VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input , -10~60°C | |
DR-4512 | 45W DIN-Rail 12VDC/3.5A Power Supply with universal 100 to 240VAC input, -10~50°C | |
DR-4524 | 45W DIN-Rail 24VDC/2A Power Supply with universal 100 to 240VAC input, -10~50°C | |
DR-75-12 | 75W DIN-Rail 12VDC/6.3A Power Supply with universal 100 to 240VAC input, -10~60°C | |
DR-75-24 | 75W DIN-Rail 24VDC/3.2A Power Supply with universal 100 to 240VAC input, -10~60°C | |
DR-75-48 | 75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input, -10~60°C |