MODEL:
IAP-420+
Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D
(Bộ thu phát không dây chuẩn công nghiệp IEEE 802.11 b/g/n với 2 cổng mạng 10/100Base-T(X)), 1 cổng PoE P.D)
- Introduction
- Specification
- Order Information
- Accessory
- Download
Overview |
IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network. |
Features |
|
Specifications | ||
ORing Switch Model | IAP-420 | IAP-420+ |
Physical Ports | ||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | |
PoE P.D. Port | - |
Present at ETH |
WLAN Interface | ||
Operating Mode |
AP/Client/Bridge/AP-Client |
|
Antenna and Connector | 1 x External reverse SMA-type antenna connector | |
Radio Frequency Type | DSSS, OFDM | |
Modulation |
IEEE802.11b: CCK, DQPSK, DBPSK |
|
Frequency Band |
America / FCC: |
|
Transmission Rate |
802.11b: 1/2/5.5/11 Mbps |
|
Transmit Power |
802.11b: 19dBm ±1.5dBm |
|
Receiver Sensitivity |
802.11b: -90dBm ±2dBm@1Mbps |
|
Encryption Security |
WEP: (64-bit, 128-bit key supported) |
|
Wireless Security | SSID broadcast disable and enable | |
Protocol Support | ||
Protocol | ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP | |
LED Indicators | ||
Power Indicator |
LED x 3, PWR 1, 2, (PoE): |
|
10/100Base-T(X) RJ45 Port Indicator | LED x 2 , Green for port Link/Act at 100Mbps. | |
WLAN LEDs | WLAN Link /ACT: Green: Blinking | |
Power | ||
Redundant Input Power | Dual DC inputs. 12~48VDC on 4-pin terminal block | |
Power Consumption (Typ.) | 4 Watts | |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present | |
Physical Characteristics | ||
Enclosure | IP-30 | |
Dimensions (W x D x H) | 41(W)x81(D)x95(H) mm | |
Weight (g) | 292 g | 297 g |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -10 to 60°C(14 to 140°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory Approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A | |
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
|
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-31 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 | |
Warranty | 5 years |
Model Name | Description |
IAP-420_EU | Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) EU band |
IAP-420_US | Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) US band |
IAP-420+_EU | Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., EU band |
IAP-420+_US | Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., US band |
High Gain Omnidirectiona Antennas | ||
RFA-O10-NM-WA | Omni-directional High-gain Antenna, 5GHz, 10dBi max, N Male connector | |
RFA-O12-NF-WA | Omni-directional High-gain Antenna, 5GHz, 12dBi max, N Female connector with wall-mount bracket | |
RFA-O5-NM-WA | Omni-directional High-gain Antenna, 5GHz, 5dBi max, N Male connector | |
RFA-O7-NM-WG | Omni-directional High-gain Antenna, 2.4GHz, 7dBi max, N Male connector |
Omnidirectional Antennas | ||
RFA-O5-NF3-W3GGS-028 | Rooftop/Outdoor High Performance Omni Antenna , 3G/4G, GPS/GLONASS applications, 5dBi max.,N Female connector |
RF Antenna Base | ||
RFB-M2-1000 | N Female magnetic antenna base with cable length 10m and RP-SMA Male connector | |
RFB-M2-150 | N Female magnetic antenna base with cable length 1.5m and RP-SMA Male connector |
RF Cable | ||
RFC-SM-SMR-150 | Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector | |
RFC-NF-NM-1000 | Low loss RF Cable, Cable length 10m, N Male to N Male connector | |
RFC-NF-NM-500 | Low loss RF Cable, Cable length 5m, N Female to N Male connector | |
RFC-NM-NM-150 | Low loss RF Cable, Cable length 1.5m, N Male to N Male connector | |
RFC-NM-SMR-1000 | Low loss RF Cable, Cable length 10m, N Male to RP-SMA Male connector | |
RFC-NM-SMR-150 | Low loss RF Cable, Cable length 1.5m, N Male to RP-SMA Male connector | |
RFC-NM-SMR-500 | Low loss RF Cable, Cable length 5m, N Male to RP-SMA Male connector | |
RFC-SF-SMR-150 | Low loss RF Cable, Cable length 1.5m, SMA Female to RP-SMA Male connector | |
RFC-SFR-SMR-1000 | Low loss RF Cable, Cable length 10m, RP-SMA Female to RP-SMA Male connector | |
RFC-SJ-SMR-150 | Low loss RF Cable, Cable length 1.5m, SMA Male to RP-SMA Male connector | |
RFC-NF-NM-50 | Low loss RF Cable, Cable length 0.5m, N Female to N Male connector |
RF Surge Protector | ||
RFP-NF-NM-WAG | High-power RF Surge Protector, 0~6GHz, N Female to N Male connector |
Datasheet |
Preview |
Version | Release Date |
Size |
Download |
DataSheet_IAP-420(+).pdf |
No |
May 03, 2016 | 286.18KB | ||
UserManual |
Preview |
Version | Release Date |
Size |
Download |
User manual_IAP-420(+).pdf |
No |
V1.1 | May 03, 2016 | 1.59MB | |
Certification |
Preview |
Version | Release Date |
Size |
Download |
ORing_Wireless _Product_CE_ Declaration_of_Conformity- 2019.pdf | See detail
ORing_Wireless _Product_CE Declaration_of_Conformity-2019 |
Mar 07, 2019 | 182.70KB | ||
QIG |
Preview |
Version | Release Date |
Size |
Download |
QIG_IAP-420 Series.pdf |
No |
V1.1 | May 03, 2016 | 232.27KB | |
Firmware |
Preview |
Version | Release Date |
Size |
Download |
FW_IAP-420.zip |
No |
V1.0e | May 03, 2016 | 6.32MB |