Oringnet, switch oring, switch công nghiệp, bộ chuyển mạch, industrial switch, 61850, IEC61850, oringvietnam, oring việt nam, hoàng vân, công ty hoàng vân, hoangvanco, soatvetudong, soát vé tự động, switch taiwan, taiwan, việt nam, vietnam, switch poe, switch, IEC

Chi tiết sản phẩm

MODEL:

INJ-102GT-24V

Industrial 2-port Gigabit High Power PoE Injector,12V~57V Input Support

(Bộ chuyển đổi nguồn PoE High Power Gigabit 2 cổng chuẩn công nghiệp, hỗ trợ nguồn vào 12~57V)

Introduction
Specification
Order Information
Accessory
Download

Overview

The INJ-102GT-24V PoE Injector is not only an IEEE802.3at compliant device with intelligent detection that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/af compliant device can be powered with the INJ-102GT-24V PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 12~57V insertion, the installer doesn't need to worry about voltage drops caused by cable length. The INJ-102GT-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/af PoE standards.

Note: P.D. side must be fully compliant IEEE 802.3at/af standard in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).

Features

PoE+Injector for 1x10/100/1000 Base-T(X)
Fully compliant with IEEE 802.3at/802.3af standard
Auto protection for Over Voltage Power Input and over current output
Supports Power Output up to 30Watts per port
Supports wide Power Input range from 50~57VDC
IP-30 Rugged Case Design
DIN-Rail and Wall Mount Design

Specifications
ORing Injector Model	INJ-102GT-24V
Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input	2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output	2
Operating Voltage
Input Voltage	12 ~ 57 Vdc on 4-pin terminal block
Output Power	50V / 600mA, 30 Watts max. Per port
LED Indicator
Power Indicator	PWR / Ready: 1 x LED Green On: Power is on and functioning Normally.
PoE Indicators	2 x LED Blue On: PoE Device Link Blue Blinking: Detecting PoE Device Blue Off : None PoE Device Detected
Protection
Short Circuit Protection	Present
Over Load Protection	Present
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.)
Weight (g)	370 g
Environmental
Storage Temperature	-40 to 80°C (-40 to 176°F)
Operating Temperature	-20 to 70°C (-4 to 158°F)
Operating Humidity	5% to 90% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A,
EMS	IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1

Model Name	Description
INJ-102GT	Industrial 2-port Gigabit High Power PoE Injector
INJ-102GT-24V	Industrial 2-port Gigabit High Power PoE Injector,12V~57V Input Support

Datasheet	Preview	Version	Release Date	Size	Download
Datasheet_INJ-102GT-24V.pdf	No	V1.0	Apr 19, 2017	998.25KB
QIG	Preview	Version	Release Date	Size	Download
QIG_INJ-102GT-24V.pdf	No	V1.0	May 11, 2016	334.59KB